Oil & Gas Flame resistant, waterproof, breathable outerwear

GORE® FR Apparel

GORE® FR Apparel delivers an optimal combination of protection, comfort, and durability for Oil & Gas industrial applications.

Constructed with GORE-TEX® PYRAD® laminates GORE® FR Apparel foul weather outerwear is durably resistant to flame, petroleum and common oil based muds while offering an unsurpassed combination of environmental protection, breathable comfort and minimal bulk.

GORE® FR Apparel enhances worker safety by reducing risk of injury from a broad range of industrial threats and hazardous conditions.

GORE® FR Apparel ensures worker comfort by increasing range of motion, minimizing bulk, and reducing the effects of moisture build-up across a wide range of environmental conditions and varying work rates.

Gore Technologies

GORE-TEX® Products

The durably waterproof, windproof, breathable fabric that keeps you dry, warm, and comfortable in a wide range of climates.

GORE® PYRAD® Products

Enhanced heat and flame protection using non-FR textiles

Safety & Protection

  • Flash-fire resistant
  • Foul weather protective - rain, wind, snow
  • Meets or exceeds ASTM F2733-09
  • ASTM F1891-12 EBT = 8.8 cal/cm2
  • Hot water/hot liquid splash and steam resistant
  • Petroleum and oil based mud resistant
  • HI-VIS trim per ANSI/ISEA 107-15, Class O, Type 1 and CSA Z96-15, Class 1, Level 2

Comfort

  • Lightweight and flexible
  • Waterproof and windproof
  • Breathable for excellent moisture management 

Durability & Care

  • Abrasion & snag resistant
  • Cold crack resistant in extreme low temperatures
  • Easy clean & care with reduced risk of residual contaminants 

How To Buy

GORE® FR Apparel with GORE-TEX® PYRAD® fabric distributor partners:

Tyndale USA

215.766.5660

Wayne Enterprises

713.896.0300

Apparel Solutions International

The Coverall Shop

403.314.0346

GORE-TEX® PYRAD® fabric manufacturing partners

Lac-Mac, Ltd.

888.452.2622

National Safety Apparel (NSA)

Printable Literature

Printable Literature

Learn more about GORE® FR Apparel

Clean & Care Instructions

Gore recommends:

1 hour pre-soak in warm water with FFT laundry solution followed by wash cycle on warm with zippers and hook and loop areas closed, tumble dry hot

or

1 hour pre-soak in warm water with DAWN® liquid detergent followed by wash cycle on warm with zippers and hook and loop areas closed, tumble dry hot

WARNING: GORE-TEX® PYRAD® garments are designed for accidental or short duration exposure to flame. It is not intended for extended exposure to flame or heat. It should not be used for fire entry or fire fighting applications. In order to provide the intended protection to the wearer, the garment must be worn properly and care instructions must be followed. No product including garments, footwear, or handwear can offer absolute protection, even when new, and their protective properties decline with wear, tear, and abrasion and other damage associated with use. W. L. Gore & Associates makes no guarantee of how the product will perform in actual use.